資料來源:https://www.seeedstudio.com/96Boards-Sensors-p-2617.html
The 96Boards Sensors Mezzanine adapter makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board. With it you can connect your favourite Grove modules and Arduino compatible shields and interface to software running on the 96Boards baseboard. It provides everything you need to start experimenting and prototyping on the 96Boards platform.
On the board you will find sockets for 18 Grove modules, an Arduino-compatible shield socket, and two SPI headers. It also includes an ATMega328 microcontroller which can be programmed from the Arduino IDE and will run most Arduino UNO sketches unchanged. The shield connector and 10 of the Grove sockets are controlled by the microcontroller, while the remaining 8 Grove sockets are controlled directly by the baseboard. This makes it a flexible prototyping platform which supports both direct control of devices from application software, and offload to a microcontroller. It also provides a USB-UART interface to access the baseboard’s serial console.
The Sensors board attached on top of a 96Boards CE or EE edition board using the 40pin low-speed expansion connector.
Please note: A 96Boards baseboard is not included.
This board has been tested and works with the Qualcomm Dragonboard 410c and the LeMaker HiKey boards.
Features
Integrated ATMEGA328p microcontroller (Arduino compatible)
18 Grove connectors
http://www.seeedstudio.com/wiki/Grove_System
5x baseboard GPIO ports
5x I2C ports (1 for baseboard, 2 for microcontroller)
5 digital ports (for microcontroller)
3x analog ports (for microcontroller)
2x SPI connectors (1 to baseboard, 1 to microcontroller)
Arduino UNO compatible shield connectors
LED: Power, Reset, 2x baseboard GPIO, 1x microcontroller IO
UART interface between baseboard and microcontroller
USB-UART connector for baseboard console and control
Part List
1x 96Boards Sensors Board
4x M2.5 8mm nylon spacer
4x M2.5 nylon screw
Getting Started Guide
Schematic: https://github.com/96boards/96boards-sensors/raw/master/Sensors.pdf
Design Files: https://github.com/96boards/96boards-sensors
For any technical support or suggestion, please kindly go to our forum.
Dimensions | 140mm x 135mm x 19mm |
Weight | G.W 34g |
Battery | Exclude |
96Boards Sensors | 1 |
該96Boards傳感器夾層適配器使得它簡單易傳感器和設備連接到任何96Boards兼容基板。有了它,你可以連接你喜歡的樹叢模塊和兼容Arduino的盾牌和接口上96Boards底板上運行的軟件。它提供了你需要開始試驗和原型的96Boards平台上的一切。
在船上你會發現18格羅夫模塊,一個Arduino兼容的屏蔽接口,以及兩個SPI頭插座。它還包括一個ATMega328微控制器,它能夠從Arduino的IDE進行編程和運行大多數的Arduino UNO草圖不變。屏蔽連接器和樹叢插座10是由微控制器控制,而餘下的8格羅夫插座由底板直接控制。這使得一個靈活的原型開發平台,它支持無論是從應用軟件的設備的直接控制,並卸載到微控制器。它也提供了USB-UART接口來訪問底板的串行控制台。
該傳感器板安裝在使用40pin的低速擴展連接器的96Boards CE或EE版本板的頂部。
請注意:不包括一個96Boards基板。
該板已經過測試,並與高通公司Dragonboard 410c和LeMaker HiKey板的工作原理。
特徵
零件清單