資料來源:https://www.seeedstudio.com/depot/Intel-Edison-p-2150.html
The Intel® Edison development platform is bringing down barriers in the world of wearables and IoT technology.
Dimensions:32.5 x 25.0 x 3.9 mm
Uses a 22nm Intel® SoC that includes a dual core, dual threaded Intel® Atom™ CPU at 500MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz. It supports 40 GPIOs and includes 1GB LPDDR3, 4 GB EMMC, and dual-band WiFi and BTLE on a module slightly larger than a postage stamp.
The Intel Edison module will initially support development with Arduino* and C/C++, followed by Node.JS, Python, RTOS, and Visual Programming support in the near future.
It includes a device-to-device and device-to-cloud connectivity framework to enable cross-device communication and a cloud-based, multi-tenant, time-series analytics service.
Physica | |
Form factor | Board with 70-pin connector |
Dimensions | 32.5 x 25.0 x 3.9 mm |
Operating temperature | 0 to 40 degC |
Connector |
Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height) |
Memory |
|
Max Memory size | 4GB |
Memory type | DDR3, Nand Flash |
Physical add. Ext. | 32-bit |
# of DIMMs | 0 |
ECC Memory supported: | NO |
External Interfaces | |
Total of 40 GPIOs which can be configured as: | |
SD Card | 1 Interface |
UART | 2 Controllers |
I2C | 2 Controllers |
SPI | 1 Controller with 2 chip selects |
I2S | 1 Controller |
GPIO | Additional 12 (with 4 capable of PWM) |
USB 2.0 | 1 OTG Controller |
Clock Output | 32 KHz, 19.2 MHz |
Major Edison Components | |
SoC | 22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz |
RAM | 1 GB LPDDR3 POP memory |
Flash Storage | 4 GB eMMC |
WiFi | Broadcom 43340 802.11 a/b/g/n |
Dual-band (2.4 and 5 GHz) | |
On board antenna or external antenna SKU configurations | |
Bluetooth | BT 4.0 |
Power | |
Input | 3.3V – 4.5V |
Output | 100ma @3.3V and 100ma @ 1.8V |
Power | Standby (No radios): 13mW |
Standby (BT 4.0): 21.5mW | |
Standby (WiFi): 35 mW | |
Firmware + Software | |
CPU OS | Yocto Linux v1.6 |
Development Environments | Arduino IDE |
Eclipse supporting: C, C++ & Python | |
Intel XDK supporting: Node.JS & HTML5 | |
MCU OS | RTOS |
Development Environments | MCU SDK and IDE |
Related Products:
USB Console Adapter for Intel Galileo
Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen
Grove starter kit plus – Intel IoT Edition for Intel Galileo Gen 1
英特爾愛迪生開發平台打倒壁壘身打扮和物聯網技術的世界。
外形尺寸:32.5點¯x25.0點¯x3.9毫米
採用了22納米英特爾的SoC,其中包括一個雙核心,頻率為500MHz的雙線程的英特爾®凌動™CPU和32位英特爾®夸克™微控制器在100MHz。它支持40個GPIO,包括1GB的LPDDR3,4GB EMMC和雙頻WiFi和BTLE比郵票稍大的模塊。
英特爾愛迪生模塊最初將支持開發的Arduino *和C / C ++,隨後的Node.js,Python和RTOS,並在不久的將來可視化編程支持。
它包括一個設備到設備和設備到雲連接框架,使跨設備通信和基於雲的多租戶,時間序列分析服務。
物理學 | |
構成因素 | 用70針連接器板 |
外形尺寸 | 32.5點¯x25.0點¯x3.9毫米 |
工作溫度 | 0至40攝氏度 |
連接器 | 廣瀨DF40系列 (1.5毫米,2.0毫米或3.0毫米堆疊高度) |
記憶 | |
最大內存大小 | 4GB |
內存類型 | DDR3,NAND閃存 |
物理加。分機。 | 32位 |
的DIMM# | 0 |
ECC內存的支持: | 沒有 |
外部接口 | |
的可被配置為40個GPIO總計: | |
SD卡 | 1接口 |
UART | 2控制器 |
I2C | 2控制器 |
SPI | 1控制器2芯片選擇 |
I2S | 1控制器 |
GPIO | 其他12(含4能夠PWM的) |
USB 2.0 | 1 OTG控制器 |
時鐘輸出 | 32千赫,19.2兆赫 |
愛迪生的主要成分 | |
系統芯片 | 22納米英特爾的SoC包括:雙核心,頻率為500MHz的雙線程的英特爾Atom處理器,在100MHz的32位英特爾夸克微控制器 |
隨機存取存儲器 | 1 GB LPDDR3內存POP |
閃存存儲 | 4 GB的eMMC |
無線上網 | 博通43340 802.11 A / B / G / N |
雙頻(2.4和5千兆赫) | |
板載天線或外置天線配置的SKU | |
藍牙 | BT 4.0 |
功率 | |
輸入 | 3.3V - 4.5V |
產量 | 100mA在3.3V和100mA在1.8V |
功率 | 待機(無收音機):13毫瓦 |
待機(BT 4.0):21.5mW | |
待機(WIFI):35毫瓦 | |
固件+軟件 | |
CPU OS | Yocto的Linux V1.6 |
開發環境 | Arduino的IDE |
Eclipse的支持:C,C ++和Python的 | |
英特爾XDK支持:Node.js的HTML5& | |
MCU OS | RTOS |
開發環境 | MCU SDK和IDE |
相關產品: