官方授權台灣代理分銷

矩陣時鐘

原名
Matrix Clock

貨號
102990135

分類
Awesome project

特價
1,960

暫無庫存

SeeedStudio 目前暫時無庫存,因為該公司無法提供確切恢復供貨時間,為了避免延宕或出貨爭議,恕不提供下單代訂服務。

資料來源:https://www.seeedstudio.com/Matrix-Clock-p-1824.html

Description

The Matrix clock is a single board, highly compact, Arduino compatible clock that displays the time on an LED matrix display. The display and rich firmware library allow for animated transitions between minutes.
 
Based on the Arduino Leonardo, the Matrix Clock is fully compatible with the Arduino IDE and can be easily updated or customised with new sketches, uploaded via a USB Micro cable. A coin cell powered Real Time Clock Calendar keeps track of the time and date when the unit is not powered. The Matrix Clock can also play musical alarms that can be easily reprogrammed with different tunes. Due to its compact form factor the Matrix clock could be fitted in any number of housings - even a pocket watch style housing. If portability is desirable then the unit can be battery powered and a sleep function is available (by taking one of the expansion pins to ground) in order to extend battery life.
 

 
Features
  • 16x8 LED Matrix display
  • ATMEGA32U4 microcontroller
  • Coin cell powered Real Time Clock Calendar (1x Battery CR1220, 12mmDia x 2mm Required)
  • Texas Instruments TLC5920 LED driver
  • 4 Buttons
  • Piezo speaker output
  • Sleep mode input
  • 2 power inputs, USB Micro connector or 6V - 9V DC in. (Normal powered by Vin switches when USB power is present).
  • Compact form factor
 
Specifications
Microcontroller Atmel ATmega32u4 in TQFP-44 package
Operating Voltage 5V USB powered or 6V to 9V Vin
Power and communications USB Micro B
Current Approx 90mA average during normal operation Max. 300mA
LED Matrix 2x, 8x8, 3mm green LEDs
Clock speed Microcontroller 16MHz, RTCC 32.768MHz
SRAM 2.5 KB
EEPROM 1 KB
Flash Memory 32 KB
Expansion Header Gnd, Vin, 5V, Sleep, Piezo-, Piezo+
Size 66mm wide x 32mm high x 17mm deep
Weight 30g
 
Documents
 
Please contact dan@carbonfrog.com for technical support, any further questions, please contact enquiry@carbonfrog.com.

Technical Details

Dimensions 110mm x 70mm x 17mm
Weight G.W 32g    
Battery Exclude

Documents


黑客帝國時鐘是一個單板,顯示的LED矩陣顯示屏上的時間非常緊湊,兼容Arduino的時鐘。顯示屏和豐富的固件庫允許分鐘之間的動畫過渡。
基於Arduino的萊昂納多,矩陣時鐘與Arduino的IDE完全兼容,可以很容易地更新或新的草圖,通過USB電纜微型載定制。供電實時時鐘日曆中的鈕扣電池跟踪的時間和日期的單位未通電。黑客帝國時鐘還可以播放可以用不同的曲調很容易重新編程音樂報警。即使是懷錶式住宅 - 由於其小巧的外形矩陣時鐘可以在任意數量的外殼被安裝。如果便攜期望則單元可以由電池供電和睡眠功能是可用的(採取膨脹引腳接地之一),以延長電池壽命。

特徵
  • 16×8 LED點陣顯示屏
  • ATMEGA32U4微控制器
  • 鈕扣電池供電的實時時鐘日曆(1個電池CR1220,12mmDia點¯x2毫米必填)
  • 德州儀器TLC5920 LED驅動器
  • 4個按鈕
  • 壓電揚聲器輸出
  • 睡眠模式輸入
  • 2電源輸入,USB微型連接器或6V - 9V DC IN(普通搭載Vin的開關時,USB電源存在)。
  • 緊湊的外形
產品規格
微控制器愛特梅爾ATmega32u4在TQFP-44封裝
工作電壓 5V USB供電或6V至9V輸入電壓
電源和通訊 USB微型乙
當前正常運行時最大約90毫安平均水平。 300毫安
LED矩陣 2倍,8×8的3mm綠色LED
時鐘速度 16MHz的單片機,RTCC 32.768MHz
SRAM 2.5 KB
EEPROM 1 KB
閃存 32 KB
擴展報頭 GND,輸入電壓,5V,睡眠,壓電,壓電+
尺寸 66毫米寬x高32毫米x17毫米深
重量 30克
文件
請聯繫dan@carbonfrog.com的技術支持,有任何疑問,請聯繫enquiry@carbonfrog.com

前往
現貨型錄

Line share