資料來源:https://www.seeedstudio.com/Arduipi-p-1609.html
This product is retired, please consider our GrovePi+ as your alternative choice.
Power the Arduino side with Raspberry power or with external power.
Selectable Arduino side power with 5V or 3.3V
FTDI cable connector to be able to program Arduino independently leaving RX/TX of arduino and Raspberry free.
ICSP connector.
Power level shifter between Pi side and Arduino side for I2C, SPI, Serial, and all Raspberry Pi GPIO pins
Raspberry Pi board Revision 2 with four new GPIO
I2C Bus available from Arduino and/or Raspberry Pi
I2C to 1-Wire controller on the board providing fully OWFS (or other) support for Raspberry Pi or Arduino with dedicated library
Feature to connect I2C between Arduino And Raspberry Pi (Arduino will become a I2C slave from Raspberry Pi)
Feature to connect SPI between Arduino and Raspberry Pi (Arduino will become a SPI slave from Raspberry)
Feature to connect the Arduino UART to Raspberry Pi Serial to do communication
Availability to use the French dedicated Téléinformation monitoring electricity signal issued from the main power meter to Arduino or Raspberry Pi (using serial RX)
Grove connector on board for I2C and Serial connection for Raspberry and Arduino
Sized place to plug aAdafruit I2C or SPI Oled breakout board that can be driven by Arduino or Raspberry Pi in SPI or I2C
Sized place to plug a NRF24L01 Wireless breakout board. In the near future, some breakout board fitting this format will be available for RFM12B RFM69W, SD card and SPI flash memory. This will let you use the majority of RF module used today
Sized place for 3 x 1-Wire devices on board.
Sized place for using PWM devices (switchable with on board power or external power)
Two free pins available on level shifter chip, this mean that is you have a device that need level conversion between 3V3 and 5V in both way, you have two pins left for this.
Compatible with Raspberry Pi A+,B,B+.
ArduiPidescription and presentation
ArduiPischematics
ArduiPigithubrepository
ArduiPiprotocol between Raspberry and Arduino
Sample of driving OLED LCD
ArduiPitest board used to test the ArduiPi board
Using NRF24L01 connector of ArduiPi to use RFM12B tranceiver
Weight | G.W 35g |
Battery | Exclude |
Arduipi | 1 |
此產品已退役, 請考慮我們的GrovePi +作為您的替代選擇。
用覆盆子電源或外部電源 Arduino 側。
可選 Arduino 側電源, 5V 或3.3V
FTDI 纜線連接器能夠程式設計 Arduino 獨立離開 RX/TX Arduino 和覆盆子免費。
ICSP 連接器。
在 pi 側和 Arduino 側之間的功率電平移位器, 用於 I2C、SPI、串列和所有覆盆子 pi GPIO 針腳
覆盆子 Pi 板修訂版2與四新 GPIO
I2C 巴士可從 Arduino 和/或覆盆子 Pi
I2C 對1線控制器的董事會提供完全 OWFS (或其他) 支援覆盆子 Pi 或 Arduino 與專用圖書館
功能連接 I2C 之間的 Arduino 和覆盆子 pi (Arduino 將成為一個 I2C 的奴隸從樹莓 pi)
Arduino 和覆盆子 Pi 之間的連接 spi 的功能 (Arduino 將成為樹莓的 spi 奴隸)
功能連接 Arduino UART 到覆盆子 Pi 串列進行通信
可用性使用法國專用 Téléinformation 監測電力信號發出從主功率計到 Arduino 或覆盆子 Pi (使用串列 RX)
樹莓和 Arduino 的 I2C 和串列連接板上的格羅夫連接器
大小的地方插頭 aAdafruit I2C 或 spi Oled 突破板, 可以驅動 Arduino 或覆盆子 Pi 在 spi 或 I2C
大小的地方, 以堵塞一個 NRF24L01 無線突破板。在不久的將來, RFM12B RFM69W、SD 卡和 SPI 快閃記憶體將會提供一些適合這種格式的突圍板。這將讓你使用的大多數射頻模組今天使用
在船上的 3 x 1 線設備大小的地方。
使用 PWM 設備的大小 (可切換電源或外接電源)
兩個自由引腳在電平移位器晶片上, 這意味著你有一個設備, 需要在3V3 和5V 之間的水準轉換, 在這兩種方式, 你有兩個引腳。
與樹莓 Pi A +, b, b + 相容。
重量 | G. W 35g |
電池 | 排除 |
Arduipi | 1 |