官方授權台灣代理分銷

公交衝擊波V3

原名
Bus Blaster v3

貨號
102990047

分類
Android

特價
1,292

SeeedStudio 採購說明

本項商品目前在台灣無庫存,將採用空運方式進口再出貨。加計下單日期、報關手續及運送時程,預計大約 10 - 15 天內可以出貨給您。

我們將在您下單當日向 SeeedStudio 原廠確認庫存狀況,並且寄發接受訂單確認通知給您。

資料來源:https://www.seeedstudio.com/Bus-Blaster-v3-p-1415.html

Description

Bus Blaster v3 is an experimental, high-speed JTAG debugger from Dangerous Prototypes. Thanks to a reprogrammable buffer, a simple update over USB makes Bus Blaster compatible with many different JTAG debugger types in the most popular open source software.

  • Based on FT2232H with high-speed USB 2.0

  • Buffered interface works with 3.3volt to 1.8volt targets

  • Reprogrammable buffer is compatible with multiple debugger types

  • Compatible with 'jtagkey', 'KT-link' programmer settings in OpenOCD, urJTAG, and more ships with JTAGkey compatible buffer image pre-programmed

  • Should support Serial Wire Debug when available

  • Mini-CPLD development board: self programmable, extra CPLD pins to header

  • Open source (CC-BY-SA)

This open source hardware and software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.


Techsupport

This product is designed by Dangerous, If you encounter any problems when using this product, please request technical support in the forum.



Technical Details

Dimensions 80mm x 120mm x 12.5mm
Weight G.W 21g    
Battery Exclude

公交車霸v3是從實驗,高速JTAG調試器危險的原型
由於可重新編程的緩衝區,通過USB的簡單升級,使總線兼容衝擊波
在最流行的開源軟件很多不同的JTAG調試器類型。
  • 根據與高速USB 2.0 FT2232H
  • 緩衝接口可與3.3volt到1.8volt目標
  • 可再編程緩衝區與多個調試器類型兼容
  • 與“jtagkey'兼容'KT-鏈接”在OpenOCD的編程設置,
  • urJTAG,更
  • 附帶JTAGkey兼容的緩衝圖像預編程
  • 時可用應支持串行線調試
  • 迷你CPLD開發板:自編程,額外CPLD引腳頭
  • 開源(CC-BY-SA)
更新在V3:
  • 安裝在一個DP8049(80x49毫米) 標準的PCB ,情況可在這裡
  • 加入串聯電阻輸入和輸出引腳,以防止損壞和噪音
  • 交換FT2232時鐘輸出引腳CPLD與潛在的邏輯分析儀模式全局時鐘功能
每個單元在發貨前進行測試。
這個開源的硬件和軟件分發,希望這將是有用的,但
沒有任何擔保。沒有針對特定用途的適銷性和適用性的內在保證。

如果您在使用本產品時遇到任何問題,請要求技術支持的論壇

前往
現貨型錄

Line share