資料來源:https://www.seeedstudio.com/Open-Workbench-Logic-Sniffer-p-612.html
The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the SUMP open source logic analyzer client and toolchain. This project is a collaboration between the Gadget FactoryandDangerous Prototypes.
Features
Capture 50MHz+ waveforms on 32 channels
200Msps captures up to 100MHz waveforms on 16 channels
100Msps captures up to 50MHz waveforms on 32 channels
16 buffered channels, 5volt tolerant
M74LCX16245DTR2G transceiver tolerates voltages from -0.5V to +7V.
216K Block RAM supports following memory configurations*
8 channels with 24K sample depth
16 channels with 12K sample depth
32 channels with 6K sample depth
External clock and trigger input
Allows interfacing with external test equipment and daisy chaining OLS's for additional channels.
Internal clock and trigger output
16bit wing expansion header
USB interface, USB powered
USB upgradable everything
Designed for the SUMP logic analyzer client
Open source
Low price
Memory depth is the maximum supported by the hardware, the current firmware implements the following memory depths:
8 channels with 16K sample depth
16 channels with 8K sample depth
32 channels with 4K sample depth
Future firmware upgrades will support the maximum memory configurations.
Note:
The cable is not included, please purchase if you need one.
This open source hardware and software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you can't accept this risk, please do not buy this hardware.
Weight | G.W 23g |
Battery | Exclude |
Open Workbench Logic Sniffer | 1 |
開放式工作台邏輯Sniffer是一個開源的邏輯分析儀帶有USB接口。硬件是專為SUMP開源的邏輯分析儀的客戶端和工具鏈。該項目是之間的合作小工具廠和危險的原型 。
特徵
存儲深度是由硬件支持的最大值,當前固件實現以下存儲深度:
未來的固件升級將支持的最大內存配置。
支持
邏輯嗅探器探頭電纜
注:不包括電纜,請購買,如果你需要一個。
這個開源硬件和軟件的分發是希望它有用,但沒有任何擔保;沒有針對特定用途的適銷性和適用性的內在保證。如果你不能接受這種風險 ,請不要購買此硬件。
如果您在使用本產品時遇到任何問題,這裡是論壇