102040046 RePhone core 2G-AtmelSAMD21推薦購買價格代理經銷

原名

貨號

102040046

分類

Wearable

特價

暫無庫存

SeeedStudio 目前暫時無庫存，因為該公司無法提供確切恢復供貨時間，為了避免延宕或出貨爭議，恕不提供下單代訂服務。

資料來源：https://www.seeedstudio.com/RePhone-core-2G-AtmelSAMD21-p-2775.html

Description

RePhone is one of the most unique and interesting development board platform that created by Seeed Studio, with RePhone you can not only DIY a special phone for yourself, but also enchant things around you with cellular connectivity. The first edition of RePhone core is Xadow – GSM+BLE, this time we provided another 2 edition of RePhone core which with higher performance and lower power consumption, one of them is the RePhone Core 2G-AtmelSAMD21 v1.0

The RePhone Core 2G-AtmelSAMD21 v1.0 is a new Arduino compatible RePhone core 2G board, which is based on Atmel’s SAMD21 and SIM800H, Most features of RePhone Core 2G-AtmelSAMD21 v1.0 is the same as Xadow – GSM+BLE, such as offering rich range of communication protocols – GSM, GPRS, and Bluetooth, supporting quad-band 850/900/1800/1900Mz, and supporting 2G Nano SD card. But the solution of Atmel’s SAMD21 plus SIM800H has dropped power consumption a lot comparing to Xadow – GSM+BLE. If you are looking for a high-performance and low power consumption Rephone core to enchant the world, the this new RePhone core 2G module is the best choice.

We also provided a more economic version RePhone core 2G Atmel32u4, the only difference is the MCU. Click here to find it.

Note

The RePhone Core 2G-AtmelSAMD21 v1.0 is compatible with all the Xadow v2.0 except the Xadow 1.54 inch Touchscreen
Please connect a battery to the board if you want to use the GSM or GPRS function in case the power form USB is not enough and fail to communicate.

Features

BAT Input Voltage: 3.4-4.2V
USB Input Voltage: 5V
Power Consumption: ~30mA@standby mode
ATSAMD21G18: Cortex-M0+, 48MHz, 256KB flash, 32KB SRAM
Nano SIM connector
Integrated Power Control System
Support AT Command
Support Bluetooth v3.0
Quad-band: 850/900/1800/1900Mz
Connector: 35 PIN Connector & 11 PIN Connector for Xadow Modules; JST 1.0 Connector for the battery
Interface: Analog Audio/I2C/SPI/UART/20*GPIO
Arduino compatible
Compatible with all Xadow 2.0 except the Xadow 1.54 inch Touchscreen
Working Temperature：-40 – 85℃
Size: 30*25mm

Technical Details

Dimensions	75mm x 115mm x 7.5mm
Weight	G.W 8g
Battery	Exclude

Part List

RePhone core 2G-AtmelSAMD21

Learn

[Wiki]RePhone core 2G-AtmelSAMD21

Wiki of RePhone core 2G-AtmelSAMD21

描述

RePhone是由Seeed Studio中創建的最獨特和有趣的開發板平台之一，因為Kickstarter上舞台的首秀有史以來，它已收到噸的關注和支持製造商在世界各地因為RePhone你不僅可以DIY一個特殊的電話為自己，也吸引您周圍的事物與蜂窩連接。

該RePhone核心2G-AtmelSAMD21 v1.0是一個新的Arduino兼容RePhone核心2G板，它是基於愛特梅爾的SAMD21和SIM800H，RePhone核2G-AtmelSAMD21 V1.0的大多數功能是一樣的Xadow - GSM + BLE，如為提供豐富的通信協議範圍 - GSM，GPRS和藍牙，支持四頻850/900/1800 / 1900Mz，支持2G納米SD卡。但Atmel的SAMD21加SIM800H的解決方案已經降到功耗很多比較Xadow - GSM + BLE。如果您正在尋找一款高性能，低功耗的核心Rephone附魔的世界，這個新的RePhone核心2G模塊是最好的選擇。

注意：

該RePhone核心2G-AtmelSAMD21 v1.0是與所有的Xadow V2.0除了Xadow 1.54英寸的觸摸屏兼容
如果你想使用情況下，GSM或GPRS功能的電源形式USB是不夠的，無法溝通，請電池連接到主板。

特徵

BAT輸入電壓：3.4-4.2V
USB輸入電壓：5V
功耗：〜30Ma的@待機模式
ATSAMD21G18：的Cortex-M0 +，頻率48MHz，256KB閃存，32KB SRAM
Nano SIM卡連接器
集成功率控制系統
支持AT命令
支持藍牙v3.0
四頻：850/900/1800 / 1900Mz
連接器：35針連接器和11針連接器Xadow模塊; JST 1.0連接器電池
接口：模擬音頻/ I2C / SPI / UART / 20 * GPIO
Arduino的兼容
與所有Xadow 2.0除Xadow 1.54英寸的觸摸屏兼容
工作溫度：-40 - 85℃
尺寸：30 *25毫米

文件

對於庫和文檔，請訪問我們的維基頁面。
關於技術的討論，請來到我們的論壇。
對於您希望與社區分享的項目，請訪問配方。