官方授權台灣代理分銷
7寸普的小獵犬骨黑 - 觸摸顯示器
原名
7 Inch LCD Cape for Beagle Bone Black - Touch Display
貨號
101990010
分類
BeagleBone
特價
3,432
暫無庫存
SeeedStudio 目前暫時無庫存，因為該公司無法提供確切恢復供貨時間，為了避免延宕或出貨爭議，恕不提供下單代訂服務。
資料來源：https://www.seeedstudio.com/7-Inch-LCD-Cape-for-Beagle-Bone-Black---Touch-Display-p-1697.html
Description
The 7'' LCD CAPE which features a 7.0 TFT LCD 800x480 resolution display, is a cape specifically designed for the Beagle Bone Black (BBB). It provides a 7.0 primary display for the BBB for direct user interaction and information display, along with the ability for additional CAPES to be attached at the same time.
The 4DCAPE-70T utilises the drivers developed for the CircuitCo LCD7 A3, however it provides a different form factor and pricing point to the LCD7.
The BBB connects directly to the back of the 4DCAPE-70T, and allows everything the CAPE requires such as power and display signals. Another CAPE can be added to the secondary connectors on the back of the module if required.
The 4D 7.0 LCD CAPE features 7 push buttons below the screen, LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER, along with 2 LEDs to indicate Power and User Status (normally heartbeat).
Mounting of the 4DCAPE-70T is achieved with the 4x 3.5mm mounting holes present on the CAPE, enabling standard M3 or #6-32 screws to fasten the 4DCAPE-7.0 as required.
If you want to know the details about how to use the LCD with BeagleBone Black, please read the 4DCAPE-70T Datasheet.
Note
This product isn't include the BeagleBone Black.
This LCD not compatible with BeagleBone, can only works with BeagleBone Black.
Features
7.0 TFT LCD CAPE for the BeagleBone Black
Resistive Touch Display
7 push buttons including LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER
2 LED Lights for Power and User
2x2 Jumper with shunts for EEPROM CAPE ID selection
Module dimensions: 179.9 x 114.9 x 19.5mm
Module dimensions with BeagleBone Black connected: Approx 179.9 x 114.9 x 19.5mm
4x 3.5mm Mounting holes
RoHS and CE Compliant
Specification
5V DC Supply suitable for the BeagleBone Black, recommended 2A @ 5V.
Includes
1x 4DCAPE-70T Display Module
1x Quick Start Guide
Documents
Software
Technical Details
| Dimensions | 210mm x 140mm x 35mm |
| Weight | G.W 300g |
| Battery | Exclude |
描述
7寸液晶網開設有一個7.0 TFT LCD 800×480分辨率的顯示屏，是專門為小獵犬骨黑（BBB）設計了一個斗篷。它提供了血腦屏障直接用戶交互和信息顯示的7.0主顯示器，有能力對附加披肩到同時被連接一起。
該4DCAPE-70T採用了CircuitCo LCD7 A3開發的驅動程序，但它提供了不同的外形和價格指向LCD7。
血腦屏障直接連接到4DCAPE-70T的背面，並允許所有的CAPE需要如電源和顯示信號。如果需要的話另網開可以加入到輔助連接器的模塊的背面。
四維7.0 LCD CAPE採用了屏幕下方的7個按鈕，左，右，上，下，Enter鍵，RESET和POWER，有2個LED一起指示電源和用戶狀態（正常心跳）。
在4DCAPE-70T的安裝與4倍3.5毫米安裝孔出現在CAPE，使標準M3或＃6-32螺絲需要擰緊4DCAPE-7.0實現的。
如果你想了解如何使用BeagleBone黑色液晶的細節，請閱讀 4DCAPE-70T數據表 。
注意：
- 本產品不包括BeagleBone黑色。
- 該液晶BeagleBone不兼容，只能適用於BeagleBone黑色。
特徵：
- 7.0 TFT LCD CAPE的BeagleBone黑
- 電阻式觸摸顯示器
- 7按鍵，包括左，右，上，下，Enter鍵，RESET和POWER
- 2 LED燈電源和用戶
- 2x2的跳線與分路器用於EEPROM CAPE ID選擇
- 模塊尺寸：179.9點¯x114.9點¯x19.5毫米
- 與BeagleBone黑色模塊連接尺寸：約179.9點¯x114.9點¯x19.5毫米
- 4X3.5毫米安裝孔
- 符合RoHS和CE認證標準
規範：
- 5V DC電源適合BeagleBone黑色，推薦2A，5V。
包括：
- 1X 4DCAPE-70T顯示模塊
- 1個快速入門指南
文件：
軟件：
