資料來源:https://www.seeedstudio.com/Grove---Light-Sensor-%28P%29-v1.1-p-2693.html
Differs from the last version, the Grove - Light Sensor (P) v1.1 uses the LS06-S phototransistor as a replacement of the traditional Light Dependent Resistor (LDR) sensors. The LS06-S light sensor has much more linear analog output conforming to illuminance, which ranges from 0 to the supplying voltage (normally 5V). A value equals to the supplying voltage can be detected when it’s exposed to daylight, and it gives 0V when you covered it with your hand.
Features
linear analog output conforming to illuminance
Low dark current and low working lux
Easy to use
Specifications
Power supply: 3.3 - 5V DC
Phototransistor: LS06-S
Connector: 4 pin Buckled Grove interface
Dimension: 20mm*20mm
Documents
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting StartedandIntroduction to Grove before your using of the product.
It will be appreciated if you can help us improve the documents, provide more demo code or tutorials. For technical support, please post your questions to our forum.
Dimensions | 130mm x 90mm x 9.5mm |
Weight | G.W 8g |
Battery | Exclude |
Grove - Light Sensor(P) V1.1 | 1 |
從不同 最後一個版本 ,格羅夫-光傳感器(P)1.1版採用了LS06-S光電晶體管作為替代傳統光敏電阻(LDR)傳感器。的LS06-S光傳感器具有更線性模擬輸出符合照度,其範圍為0到供給電壓(通常為5V)。值等於供電電壓可以當它暴露在日光下進行檢測,並給出了0V,當你用你的手遮蓋。
主要特徵
線性模擬輸出符合照度
低暗電流和低工作勒克斯
使用方便
規格
電源:3.3 - 5V DC
光電晶體管:LS06-S
連接器:4針扣帶格羅夫接口
尺寸:20毫米*20毫米
DOCUMENTS
對於所有用戶格羅夫(尤其是新手),我們為您提供指導PDF文檔。請下載並通讀 前言-入門 並 介紹格魯夫 您的產品使用前。
可以理解的,如果你能幫助我們改進文檔,提供更多的演示代碼或教程。有關技術支持,請發表您的問題給我們的 論壇 。