官方授權台灣代理分銷
Grove - 晴雨表（高精度）
資料來源：https://www.seeedstudio.com/Grove---Barometer-%28High-Accuracy%29-p-1865.html
Description
This Grove - Barometer (High-Accuracy) Sensor features a HP206C high-accuracy chip to detect barometric pressure ,Altimeter and temperature. It can widely measure pressure ranging from 300mbar~1200mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode.The chip only accepts 1.8V to 3.6V input voltage. However, with outer circuit added, this module becomes compatible with 3.3V and 5V. Therefore, it can be used on Arduino/Seeeduino or Seeeduino Stalker without modification.It is designed to be connected directly to a micro-controller via the I2C bus.
Features
Digital two wire (I2C) interface
Command-based Reading, Compensated (Optional)
Programmable Events and Interrupt Controls
Full Data Compensation
Wide barometric pressure range
Flexible supply voltage range
Ultra-low power consumption
Altitude Resolution down to 0.01 meter
Temperature measurement included
Technical Details
| Dimensions | 140mm x 85mm x 10.6mm |
| Weight | G.W 10g |
| Battery | Exclude |
Part List
| Grove - Barometer (High-Accuracy) | 1 |
| Grove - cable | 1 |
這格羅夫 - 晴雨表（高精度）傳感器配有HP206C高精度芯片，檢測氣壓，高度計和溫度。它可以廣泛地測量壓力範圍從300mbar〜1200mbar，與0.01mbar（0.1M）的超高分辨率mode.The芯片超高精度只接受1.8V至3.6V的輸入電壓。然而，隨著外部電路增加，這種模塊就成為3.3V和5V兼容。因此，它可以在阿爾杜伊諾/ Seeeduino或Seeeduino斯托克未經modification.It用於被設計成直接連接到經由I2C總線微控制器。
特徵
- 數字兩線（I2C）接口
- 基於命令行的閱讀，補償（可選）
- 可編程事件和中斷控制
- 完全數據補償
- 寬氣壓範圍
- 靈活的電源電壓範圍
- 超低功耗
- 海拔分辨率降至0.01米
- 包括溫度測量
