資料來源:https://www.seeedstudio.com/UDOO-NEO-FULL%C2%A0-p-2819.html
UDOO NEO is whatever you need to approach the world of makers.
Launched in 2015 and funded by thousands of enthusiasts worldwide through Kickstarter, UDOO NEO is an Arduino-powered Android / Linux single board computer enriched with 9-axis motion sensors, Bluetooth 4.0 and a Wi-Fi module.
The unique feature of UDOO NEO is its heterogeneous processor, based on two cores embedded on the very same chip. We are speaking of a powerful 1GHz ARM® Cortex-A9and an Arduino UNO-compatible platform that clocks at 200 MHz, based on a Cortex-M4 I/O real-time co-processor, all wrapped into an i.MX 6SoloX processor by NXP.
UDOO NEO can be used in many ways. First of all as a low power computer attached to a screen, a mouse and a keyboard. In a second place it can be used as a ARM development board as well as a ATMEL development board. This is the context where the board shines the most, ensuring compatibility You can make the most out of it if you build a drone, a robot, a rover, a 3D printer, a home automation service, an autonomous system. Finally, it can be exploited as an embedded board, i.e. a board designed to work within an embedded context.
The most complete tool for wireless mobile IoT applications.
UDOO NEO FULL is the best, all-in-one solution for wireless mobile IoT applications.
UDOO NEO FULL can be powered in three ways. You can use:
A standard 12 volts power supply.
A Micro USB cable like this one.
Any USB battery pack available on the market.
You can use it as a Headless Device, exploiting the USB and Ethernet ports and the Wireless Connectivity - a powerful Wi-Fi b/g/n and the newest Bluetooth 4.0. You can also use it as a computer, thanks to its 1GB of RAM. The board is compatible with most Arduino shields, sensors and actuators. UDOO NEO FULL is also compatible with UDOO Bricks: programmable modules, like the temperature sensor and the barometric sensor, that you can add to make UDOO NEO FULL even more versatile.
Freescale™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Integrated 2d/3d graphics controller
RAM 1GB
Micro HDMI interface - LVDS interface + touch (I2C signals)
Analog camera connection supporting NTSC and PAL - 8-bit parallel camera interface
MicroSD card slot onboard - 8-bit SDIO interface
HDMI audio transmitter - S/PIDF & I2S
1x USB 2.0 Type A ports - 1x USB OTG (micro-AB connector)
Fast ethernet RJ45 – 10/100Mbps - Wi-Fi 802.11 b/g/n,Direct Mode SmartConfig and Bluetooth 4.0 Low Energy
3x UART ports - 2x CAN Bus interfaces
8x PWM signals - 3x I2C interface - 1x SPI interface - 6x multiplexable signals
Power Supply: 5 V DC Micro USB, 6-15 V DC Power Jack, RTC Battery Connector
Green Power Status LED - User Configurable LEDs (Red and Orange)
Integrated Sensors: 3-Axis Accelerometer - 3-Axis Magnetometer - 3-Axis Digital Gyroscope - 1x Sensor Snap-In I2C connector
Dimensions: 89mm x59mm (3.50″ x 2.32″)
Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields
32 extended GPIOs (A9 dedicated) - 22 arduino GPIOs (M4 dedicated)
6 available Pins
Android Lollipop & Linux UDOObuntu2 (14.04 LTS)
For more information, please click UDOO Neo Docs
Dimensions | 100mm x 70mm x 25mm |
Weight | G.W 60g |
Battery | Exclude |
UDOO NEO FULL | 1 |