原廠連結:http://www.seeedstudio.com/wiki/Seeeduino_Lotus_v1.0_开发板
Seeeduino Lotus是一款ATmega328微控制器開發板。它是Seeeduino和基礎板的結合。使用了Atmel ATMEGA328P-MU和CH340。ATMEGA328P-MU是一款高性能、低功耗的8位AVR微控制器。CH340是一個USB總線轉換芯片可實現USB到串口的轉換。Seeeduino Lotus具有14路數字輸入輸出(其中6路可輸出PWM)和7路模擬輸入輸出,一個數據連接線,一個ICSP接頭,12個Grove接頭,一個復位按鍵。
Seeeduino Lotus使用CH340下載,它需要安裝驅動。
完全兼容Windows操作系統終端的串口應用程序。
驅動下載地址:http://www.wch.cn/downloads.php?name=pro&proid=178。
我們將展示如何使用Seeeduino Lotus。
絲印層D5附近的Grove接頭有錯誤,D4,D5應該改為D5,D6。我們會盡快訂正。
資料來源:https://www.seeedstudio.com/Seeeduino-Lotus---ATMega328-Board-with-Grove-Interface-p-1942.html
This version will EOL soon, please click here for the latest version Seeeduino Lotus V1.1, which has updated the USB converter chip so as to be compatible with Mac OS and also more cost effective.
Seeeduino Lotus is an ATmega328 Microcontroller development board. It is a combination of Seeeduino and Base Shield. It uses Atmel ATMEGA328P-MU and CH340. ATMEGA328P-MU is a high performance, low power 8-Bit AVR Microcontroller. CH340 is an USB bus converter chip that can realize an USB to serial interface. Seeeduino Lotus has 14 digital input/output (6 of which can output PWM) and 7 analog input/output, a micro USB connection, an ICSP header, 12 Grove connections, a reset button.
SPECIFICATION
Microcontroller: ATmega328P-MU
Operating Voltage: 5V
Digital I/O Pins: 14
PWM Channels: 6
Analog Input Channels: 7
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (ATmega328P-MU)
RAM: 2 KB (ATmega328P-MU)
EEPROM: 1 KB (ATmega328P-MU)
Clock Speed: 16 MHz
Dimensions | 115mm x 75mm x 25mm |
Weight | G.W 42g |
Battery | Exclude |
Seeeduino Lotus | 1 |
Wiki of Seeeduino Lotus
A motor driven sun shade, DIYed for the sun shine block for the balcony of my home, controlled by IR remote.There're some kind of sun shade controller in the market, but they are expensive and take too much space of home. So what I made is a cheap and h
In Seeed's display corner, we have made a charming map of China, telling about the maker spaces in different provinces. This LED light will turn on when people come in front, and automatically turn off after people leave. A small interaction project with
I'm a starter of Raspberry Pi and I found that Raspberry Pi doesn’t have the usb port that could directly connect to the pc, so that I pick a Seeeduino as an Uart to Usb converter to putty up my Pi. :p
This is an very intersting DIY project if you want to make an indicator for score counting of any game.