資料來源:https://www.sparkfun.com/products/14059
The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, while a Raspberry Pi 2, 3, B+ or A+ is enclosed in the compartment on the back with a simple door. A ribbon cable that comes with the display connects into the Raspberry Pi DSI port. The stand has a pivot that allows you to adjust the angle of the screen for better viewing, as well as mounting points to affix it to a certain location.
The SmartiPi Touch also includes a small case that houses your very own Raspberry Pi Camera Module, which can be attached via LEGO-compatible studs on the front or the back of the display case. Additionally, if you are looking to attach any HATs to the Raspberry Pi, you are in luck! The door to the Raspberry Pi has been cut to accommodate access to all of its GPIO pins. There is even a dual micro USB splitter cable included, which allows you to use a micro USB power supply to power the display and the Raspberry Pi at the same time!
Note: As of May 25th 2018, the SmartiPi Touch’s back panel has been updated to accommodate the POE pins on the Raspberry Pi 3 B+.
Note: The SmartiPi Touch does NOT include an LCD, camera, Raspberry Pi or any other electronics. This product only contains the case and additional assembly parts.
Includes:
Documents:
Videos
該SmartiPi觸摸是的情況下,並放置在官方樹莓丕7“觸摸屏的LCD ,顯示安全地裝配到用四個螺釘的情況下,當一個樹莓丕2,3,B +或A +封裝在隔室上用背面簡單的門,一個帶狀電纜隨顯示器連接到樹莓派DSI端口,支架有一個支點,使您可以調整屏幕的角度更好的視覺效果,以及安裝點把它貼在某個位置。
該SmartiPi觸摸還包括容納你自己的一個小案例樹莓派攝像頭模塊 ,可以通過在前面或顯示盒背面LEGO兼容的螺栓連接。此外,如果你正在尋找任何的HATs連接到樹莓派,你是幸運的!大門樹莓派已被切斷,以適應進入其所有的GPIO引腳。有甚至包括一個雙微型USB分離線纜,它可以讓你用一個微型USB電源為顯示器和樹莓派在同一時間!
注:SmartiPi觸摸不包括LCD,攝像頭,樹莓派或任何其他電子設備。此產品只包含的情況下和附加裝配零件。
包括:
文件: