進口程序準備中,近期開放購買。

注意:目前價格僅供參考。

LilyPad ProtoSnap Plus

原名
LilyPad ProtoSnap Plus

貨號
DEV-14346

特價
1,318

資料來源:https://www.sparkfun.com/products/14346

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with the free Arduino software you’ll need to program the ATmega32U4 on LilyPad USB Plus at the heart of the board. Once you’ve installed the software, you’ll be able to write and upload your own programs to the board, making it do almost anything you want.

At the center of the ProtoSnap Plus is the LilyPad USB Plus microcontroller, pre-wired to a LilyPad board including a LilyPad Light Sensor, LilyPad Buzzer, LilyPad Button Board, four pairs of colored LilyPad LEDs and a LilyPad Slide Switch. Because these components are connected together on the ProtoSnap board, you can test out your project ideas before you sew. The ProtoSnap Plus also includes expansion ports that let you sew your wearables together or use alligator cables to easily connect external sensors and components. After testing out your coding ideas using the attached LilyPad pieces, you can break apart the prototyping board and sew them into your project!

Please be aware that the Lilypad ProtoSnap Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

Get Started with the LilyPad ProtoSnap Plus Guide

Includes:

Included on the ProtoSnap

  • 1x LilyPad USB Plus
  • 1x LilyPad Light Sensor
  • 1x LilyPad Buzzer
  • 1x LilyPad Button
  • 1x LilyPad Switch
  • 2x LilyPad LED - Yellow
  • 2x LilyPad LED - Red
  • 2x LilyPad LED - Green
  • 2x LilyPad LED - Blue
  • 5x Expansion Ports

Documents:

Videos

LilyPad ProtoSnap Plus是一款可縫製的電子原型設計板,可用於探索電路和編程,然後拆分成交互式面料或可穿戴項目。使用免費的Arduino軟件對ProtoSnap Plus進行編程非常簡單,您將需要在闆卡中心的LilyPad USB Plus上編寫ATmega32U4。一旦你安裝了這個軟件,你就可以把你自己的程序寫入並上傳到板子上,使它幾乎可以做任何事情。

ProtoSnap Plus的中心是LilyPad USB Plus微控制器,預先連接到LilyPad板,包括LilyPad光傳感器,LilyPad蜂鳴器,LilyPad按鈕板,四對彩色LilyPad LED和LilyPad滑動開關。由於這些組件在ProtoSnap板上連接在一起,您可以在縫製前測試您的項目想法。 ProtoSnap Plus還包括擴展端口,可將您的可穿用材料縫在一起,或使用鱷魚皮電纜輕鬆連接外部傳感器和組件。在使用附帶的LilyPad件測試出您的編碼想法後,您可以拆分原型板並將其縫合到您的項目中!

注意:這筆銷售的一部分將發送給Leah Buechley博士,以繼續開發和教育電子紡織品。

開始使用LilyPad ProtoSnap Plus指南

包括:

包含在ProtoSnap中

  • 1x LilyPad USB Plus
  • 1x LilyPad光傳感器
  • 1x LilyPad蜂鳴器
  • 1x LilyPad按鈕
  • 1x LilyPad開關
  • 2x LilyPad LED - 黃色
  • 2x LilyPad LED - 紅色
  • 2x LilyPad LED - 綠色
  • 2x LilyPad LED - 藍色
  • 5x擴展端口

文件:

前往
現貨型錄

Line share