進口程序準備中,近期開放購買。

注意:目前價格僅供參考。

SparkFun丕楔形(預裝配)

原名
SparkFun Pi Wedge

貨號
BOB-13717

特價
328

資料來源:https://www.sparkfun.com/products/13717

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decoupling capacitors on the power supply lines. The “Wedge” also makes the initial bring-up process easier - you can plug an FTDI Basic module into the built-in serial port. Each version of this Pi Wedge comes preassembled and can be inserted into the RPi’s GPIO port that allows you to prototype - no soldering required!

The Pi Wedge is compatible with the Raspberry Pi A+, B+, or RPi2 models and it adapts the GPIO header on the RPi to a standard solderless breadboard, such as our medium, large, and extra large breadboards. While it will technically with with a mini breadboard, it won’t leave much room for external circuitry. If you love the Raspberry Pi and have been looking to start prototyping with it look no further than the SparkFun Pi Wedge!

Includes:

  • 1x Preassembled SparkFun Pi Wedge
  • 1x GPIO Ribbon Cable (40-pin, 6")

Documents:

這是SparkFun丕楔,一個連接到在樹莓丕40引腳GPIO連接器和斷開銷到線路板型的佈置和間隔,甚至增加了一些對電源線去耦電容的一小板。該“楔子”也使得初始調高過程更簡單 - 你可以插入一個FTDI基本模塊插入內置串行端口。該PI楔形的每個版本都配備預組裝,並且可以插入到RPI的GPIO端口,可以讓你的原型 - 無需焊接!

郫縣楔形與樹莓派A +,B +,或RPi2型號兼容並適用於RPI的GPIO頭一個標準焊麵包板,比如我們的媒體大型特大型麵包板。雖然在技術上會用一個麵包板,也不會留下外部電路的空間。如果你愛的樹莓派,並已開始尋找原型它看起來沒有比SparkFun丕楔形!

包括:

  • 1個預裝配SparkFun丕楔
  • 1個GPIO帶狀電纜(40針,6“)

文件:

前往
現貨型錄

Line share