資料來源:https://www.seeedstudio.com/Grove---LED-Strip-Driver-p-1197.html
Description
The LED Strip Driver with 4-pin Grove interface provides easy connectivity to your standard Arduino device or Seeed Stalker. It can help you control the luminance of a single-color LED strip, as well as the color and the luminance of an RGB LED strip through Arduino or Seeeduino.
It has 2 terminals and 2 Grove interfaces. The power for the LED strip comes in through the 2-pin terminal. And the LED controlling voltages output through the 4-pin terminal. The 2 Grove interfaces are respectively screen-printed “IN” (for controlling data input) and “OUT” (for controlling data shared with the next strip driver).
It can drive an LED strip 1 to 2 meters long with 9 V, while 1 to 5 meters long with 12 V. The driver in conjunction with the colorful LED strips can add a wonderful effect to indoor or outdoor usages.
Features
Grove compatible interface
Can be cascaded for a larger display
Best results achieved with LED strips 5 meters long or shorter
Outputs PWM signals
256 gray-levels are adjustable via programming
Arduino and MEGA compatible
Screw Terminals (power input and control signal output interface)
Technical Details
Dimensions |
120mm x 80mm x 13mm |
Weight |
G.W 15g |
Battery |
Exclude |
Part List
Grove - LED Strip Driver |
1 |
描述
帶4針格羅夫介面的 LED 帶驅動程式為您的標準 Arduino 設備或 Seeed 跟蹤器提供了簡單的連接。它可以説明您控制單色 led 帶的亮度, 以及通過 Arduino 或 Seeeduino 的 RGB led 帶的顏色和亮度。
它有2終端和2格羅夫介面。LED 帶的電源通過2針端子進入。LED 控制電壓通過4針端子輸出。2格羅夫介面分別在螢幕上列印 "in" (用於控制資料輸入) 和 "輸出" (用於控制與下一條驅動程式共用的資料)。
它可能駕駛 LED 帶1到2米長與 9 V, 而1到5米長與12五。 該驅動程式與豐富多彩的 LED 帶, 可以增加一個奇妙的效果, 室內或室外的用途。
功能
- 格羅夫相容介面
- 可以層疊以進行更大的顯示
- 5米長或更短的 LED 帶取得最佳效果
- 輸出 PWM 信號
- 256灰度級可通過程式設計進行調整
- Arduino 和巨型相容
- 螺杆端子 (電源輸入和控制信號輸出介面)
對於所有的格羅夫使用者 (特別是初學者), 我們為您提供指導 PDF 文檔。請在使用該產品之前下載並閱讀序言-入門和樹林簡介。
檔
有關此產品的更多資訊, 請訪問我們的
wiki頁面。如果您能説明我們改進文檔, 添加更多演示代碼或教程, 將不勝感激。有關技術支援, 請將您的問題張貼到我們的
論壇。
技術細節
尺寸 | 120mm x 80mm x 13mm |
重量 | G. W 13g |
電池 | 排除 |