資料來源:https://www.seeedstudio.com/7-Inch-HDMI-1280x800-IPS-Display-p-2639.html
This 7 inch High-resolution 1280*800 IPS LCD display module kit is especially designed as a monitor for Raspberry Pi 3, Pi 2 Model B and Raspberry Pi B+ B A+.
For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to the native 1280x800 in case it doesn't detect the resolution properly. The easiest way to edit the config.txt is to put the Pi TF card into an every day computer and edit config.txt with any text editor and save.
Features
Screen size: 7 inch LCD
Operating voltage: 7.5V-12V (current requirement 1A-2A)
Rated power: 6-7W
Signal input: 2 AV + VGA + HDMI (HDMI 1.2)
Resolution: 1280 * 800,
Plug and Play: Support
OSD language: Simplified Chinese, Traditional Chinese, English, Japanese, Korean, Spanish, French, German, Italian, Portuguese
Control: Multi-function OSD operation or potentiometer adjust the brightness and color
Features: Using mature program, clear display
Support image flip up and down, the image can conversion 4: 3 / 16: 9 display format
Specification
Display size: 7 inch
Touch screen: Not support
Resolution : 1280(RGB)×800
Display Mode : HS-IPS, Normally Black, Transmissive
Outline : 161.6×105.8×4.85 mm
Active Area : 150.72×94.2 mm
Brightness : 690 cd/m2 (Typ.)
Contrast Ratio : 800:1 (Typ.)
Viewing Angle : 89/89/89/89 (Typ.)(CR≥10) (L/R/U/D)
Display Colors : 262K (6-bit)
Lamp Type : WLED
Signal Interface :LVDS (1 ch, 6-bit) , 30 pins
Applications: mobile DVD, digital photo frame, car systems, multimedia applications and other audiovisual systems
Part List
1× HDMI+VGA+2AV LCD controller board
1× 7inch 1280x800 IPS LCD panel
1× LVDS Cable with adapte
1× Keyboard with Wire
Related Products
PiShow 2.4 Inch Resistive Touch Display | PiShow 2.8"Resistive Touch Display | 5 Inch HDMI Display with USB TouchScreen |
Weight | G.W 233g |
Battery | Exclude |
這7英寸高分辨率1280 * 800的IPS液晶顯示模塊套件是專為樹莓派3顯示器,PI 2 B型和樹莓派B + B A +。
對於有樹莓派使用,我們建議通過編輯config.txt到HDMI設置為1280×800原生的情況下,它無法正確檢測的分辨率。編輯config.txt的最簡單的方法就是把皮TF卡插入每天電腦和編輯的config.txt用任何文本編輯器並保存。
特徵
•Ÿ屏幕尺寸:7英寸液晶
•Ÿ工作電壓:7.5V-12V(電流要求1A-2A)
•Ÿ額定功率:6-7W
•Y信號輸入:2路AV + VGA + HDMI(HDMI 1.2)
•Y分辨率:1280×800,
•Ÿ即插即用:支持
•ŸOSD語言:簡體中國,中國傳統,英語,日語,韓語,西班牙語,法語,德語,意大利語,葡萄牙語
•Ÿ控制:多功能OSD操作或電位調整的亮度和顏色
•Ÿ特點:採用成熟的方案,顯示清晰
•Ÿ支持圖像上下翻轉,圖像可以轉換4:3月16日:9顯示格式
規範
•Ÿ顯示尺寸:7英寸
•Y觸摸屏:不支持
•Y分辨率:1280(RGB)×800
•Ÿ顯示模式:HS-IPS,常黑,透射
•Ÿ大綱:161.6×105.8×4.85毫米
•Ÿ有效面積:150.72×94.2毫米
•Ÿ亮度:690 cd / m2的(典型值)
•Ÿ對比度:800:1(典型值)。
•Ÿ可視角度:89/89/89/89(典型值)(CR≥10)(L / R / U / D)
•Ÿ顯示顏色:262K(6位)
•Ÿ燈類型:WLED
•Y信號接口:LVDS(1通道,6位),30引腳
•Ÿ應用:移動DVD,數碼相框,車載系統,多媒體應用和其他視聽系統
零件清單
•Y 1×HDMI + VGA + 2AV LCD控制器板
•Y 1×7寸1280x800的IPS液晶面板
•Y 1×LVDS電纜與adapte
•Y 1×鍵盤用鐵絲
相關產品
PiShow 2.4英寸的電阻觸摸屏的 | PiShow 2.8“電阻式觸摸顯示器 | 5寸HDMI顯示器,帶USB觸摸屏 |