資料來源:https://www.seeedstudio.com/nRF52832-Micro-Development-Board-p-2992.html
The nRF52832-MDK is a fully open-source, versatile single board development kit for Bluetooth® low energy, ANT and 2.4GHz proprietary applications using the nRF52832 SoC.
The kit gives access to 24 I/Os and interfaces via headers and has a RGB LED which is user-programmable. It also has a 2.4GHz chip antenna onboard which is quite convenient to develop IoT wireless applications.
It supports the Nordic offical SDK using GCC, Keil and IAR. Program/Debug options on the kit is DAPLink.
The nRF52832-MDK can also be used to play with multi-frameworks such as: nRF5 SDK, nRF5 SDK for Mesh, Mbed OS 5, Zephyr, Mynewt, JerryScript, Espruino, MicroPython, Web Bluetooth, Eddystone, etc.
Hardware Features
nRF52832-MDK provides the following hardware features:
Nordic Semiconductor nRF52832
ARM® Cortex™-M4F
512kB Flash Memory + 64kB RAM
Bluetooth low energy, ANT and 2.4GHz
NFC™-A tag
Program/Debug options with DAPLink
MSC - drag-n-drop programming flash memory
CDC - virtual com port for log, trace and terminal emulation
HID - CMSIS-DAP compliant debug channel
Up to 24 GPIOs at headers
Reset Button
RGB LED
2.4GHz chip antenna
3.3V regulator with 1A peak current output
VBUS & VIN Power-Path Management
Breadboard-friendly
48mm x 18mm x 13mm with headers soldered in
nRF52832-MDK can be flashed viaDAPLink, which provides methods to program and debug an application running on ARM processors via SWD.
Using the CMSIS-DAP interface, the board can be flashed via the USB storage interface (drag-and-drop) and also viapyOCD.
Support
Please contact support@makerdiary.co for technical support.
Dimensions | 48mm x 18mm x 13mm |
Weight | G.W 14.5g N.W 12g |
Battery | Exclude |
nRF52832-MDK | 1 |
描述
nRF52832-MDK是基於 Nordic nRF52832 的完全開放源代碼開發套件, 用於物聯網嵌入式應用。
它還包括一個集成的調試適配器 - DAPLink ,它提供了編程和調試應用程序的方法。這使開發人員能夠快速建立藍牙連接並評估nRF52832 SoC。
硬件特點:
•ARM®Cortex™-M4F
•512kB閃存+ 64kB RAM
•藍牙低能量
•NFC™-A標籤
•板上調試探頭DAPLink
•最多24個GPIO
•板載天線
•3.3V工作電壓
•48毫米x 18毫米,麵包板友好
nRF52832-MDK可以通過 DAPLink 進行 刷新 , DAPLink 提供了通過SWD對ARM處理器上運行的應用程序進行編程和調試的方法。
使用CMSIS-DAP接口,電路板可以通過USB存儲接口(拖放)和 pyOCD 進行 閃存 。