102990843 Pycom Fipy MicroPython enabled development

原名

貨號

102990843

分類

MicroPython

特價

SeeedStudio 採購說明

本項商品目前在台灣無庫存，將採用空運方式進口再出貨。加計下單日期、報關手續及運送時程，預計大約 10 - 15 天內可以出貨給您。

我們將在您下單當日向 SeeedStudio 原廠確認庫存狀況，並且寄發接受訂單確認通知給您。

資料來源：https://www.seeedstudio.com/Pycom-Fipy-MicroPython-enabled-development-board-%28LoRa%2C-Sigfox%2C-WiFi%2C-Bluetooth%2CLTE-CAT-M1%2CNB-IoT%29-p-2866.html

Description

Imagine 5 networks in one perfectly-formed, same-small-foot-print-as WiPy and LoPy, IoT development board. MicroPython enabled. FiPy includes WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT M1 and NBIoT) the FiPy gives access to all the world’s LPWAN networks on one tiny board.

Note: The Fipy works for all CatM1 and NB-IoT bands worldwide. We strongly recommend ordering an LTE-M Antenna for best performance.

Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.

FiPy Features

Powerful CPu
Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
1KM WiFi range
MicroPython enabled
Fits in a standard breadboard (with headers)
Ultra-low power usage: a fraction compared to other connected microcontrollers

Technical Details

Weight	G.W 31g
Battery	Exclude
Processing
Espressif ESP32 SoC
Dual processor and WiFi radio system on chip
Networking processor handles the WiFi connectivity and the IPv6 stack
Main processor is entirely free to run the user application
An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
Interfaces
2 x UART, 2 x SPI, I2C, micro SD card
ANalog channels: 8×12 bit ADCs, 2×8 bit DAC
Timers: 2×64 bit with PWM with up to 16 channels
DMA on all peripherals
GPIO: Up to 22
Hash / Encryption
SHA, MD5, DES, AES
WiFi Networking
802.11b/b/n 16mbps
Bluetooth
Low energy and classic RTC
Running at 32KHz
Range
Node range: Up to 50km
Security & Certifications
SSL/TLS support up to 1.2
WPA Enterprise security
AES encryption engine
Memory
RAM: 4MB
Flash Memory: 8MB
GPIO: Up to 22
Hardware floating point acceleration
Python multi-threading
Power
Voltage Input: 3.3V – 5.5V
3v3 output capable of sourcing up to 400mA
Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.