資料來源:https://www.seeedstudio.com/Wio-Tracker---GPS%2C-BT3.0%2C-GSM%2C-Arduino-Compatible-p-2831.html
“I like how easy it is to use with the Arduino IDE and Grove ecosystem.” – Lisa Li, Product Manager
The Wio Tracker (Wireless Input Output) is an open source gateway based on the ARM Cortex-M0+ and Arduino M0 MCU which enable faster IoT GPS solutions. This Arduino and Grove compatible development board helps you track nearly any moving thing on the planet and then upload that data wirelessly. By integrating Bluetooth 3.0 and GPRS (an LTE solution is planned for release in Q3), the Wio Tracker allows for flexible communication solutions. While there are GPS/GPRS shields available for Arduino and other development boards, Seeed believes that having a single board solution is the best approach to your project.
The Arduino and Grove compatibility allows for quicker development through numerous libraries and a supportive community. The GPS library which will be available with the board is not just limited to Arduino – it can function just as well if you chose to develop in C/C++. With 6 Grove connections available developers can plug in any combination of out 180+ sensors and actuators to make any project and solve any problem. Simplifying the prototyping and development phase is our goal.
The Wio Tracker is well suited for outdoor projects where the device can connect to the GPS satellites and provide a real-time location of the item it is attached to. The GPRS provides a moderate bandwidth which allows immediate interaction between the user and device. Some example projects could be a bicycle sharing service, tracking pets or livestock, locating a vehicle, or even keeping track of a child.
We mentioned earlier the Wio Tracker is a gateway to faster IoT solutions — and we meant it! Does your project need a few extra sensors, say a temperature sensor and maybe an accelerometer to tell the object's orientation? Our Grove sensors easily plug into our boards and allow you to quickly prototype and provide your project with a proof of concept. Next we can help you go from a prototype to an engineering sample, working with you to customize your own version of the Wio Tracker. Finally, if you decide to take your project to market we can help you with manufacturing, and even selling your product through our website and channels!
From making a fun GPS based project at home, to manufacturing and selling a GPS product to consumers, Seeed is here to help you succeed.
Note:
Please always plug a 3.7V Lipo battery in case USB power supply is not sufficient.
Key Features
Connects with GPS + BeiDou + QZSS – Allowing for Higher Precision Location Around the Globe
99 Channels Allows for Quicker Lock Times
GLP Mode - 40% Power Consumption for Normal Mode
LOCUS Technology – Records Navigation Data Automatically
GPS, GSM, and BT Antennas Included
GSM AT Commands: GSM 07.07, 07.05 and enhanced AT Command
Bluetooth 3.0 with SPP Profile and HFP-AG Profile
6 Grove Connectors (2x Digital, 2x Analog, 1x UART, 1 I2C)
Arduino IDE Compatibility
Small Form Factor (54.7mm x 48.2mm)
Nano SIM and microSD 2-in-1 Socket
Hardware Overview
Specifications
Item |
Function |
Value |
Microcontroller |
Processor |
ATSAMD21G18A-MU ARM Cortex-M0+ 48MHZ |
Memory |
256K Bytes Flash | |
32K Bytes SRAM | ||
GSM/GPRS |
GSM |
850/900/1800/1900MHz: Class 4 (2W @850/900MHz) Class 1 (1W @1800/1900MHz) |
AT Command: GSM 07.07, 07.05 and enhanced AT Command | ||
Low Power Consumption: 1.2mA@DRX=5V | ||
GPRS |
GPRS Multi-slot Class 12: Down to 85.6kbps Up to 85.6kbps |
|
Protocol: TCP/UDP/FTP/HTTP/PPP/SSL | ||
SMS |
Peer to Peer Message SMS broadcast Text and PDU mode |
|
Audio |
Echo cancellation Noise elimination |
|
Bluetooth |
Bluetooth 3.0: SPP HFP-AG |
|
GNSS |
System |
GPS L1 1575.42MHz BeiDou B1 1561.10MHz |
Precision |
<2.5 m CEP (2.5m radius) | |
Time To First Lock |
EPOTM turns on Cold Start:<15s Warm Start:<5s |
|
Technology |
EASY/LOCUS/AlwaysLocate/EPO/GLP/AIC | |
Peripheral |
Grove |
2 x Grove Digital Port |
2 x Analog Port | ||
1 x UART | ||
1 x I2C | ||
Antenna |
GSM Antenna | |
Bluetooth Antenna | ||
GNSS Antenna | ||
Others |
USB: Power Supply/Firmware Upload | |
JST 1.0 Battery Connector | ||
3.5mm Audio Jack (Mic and Sound) | ||
2 Buttons: GSM Power Button (MC20) Reset Button (M0) | ||
User RGB LED | ||
Speaker Interface | ||
Nano SIM and microSD 2 in 1 Socket | ||
Size |
Length |
54.7mm |
Width |
48.2mm | |
Weight |
Board (No Battery): 45g Antennas: 9g |
Additional Quotes from the Team
“I am excited to offer a development board with GPS, GPRS, and Bluetooth 3.0 solutions in such a small footprint.” – Ye Xiaobo, Product Manager.
Dimensions | 54.7mm x 48.2mm x 6mm |
Weight | G.W 50g |
Battery | Exclude |
Wio Tracker - GPS, BT3.0, GSM, Arduino Compatible | 1 |
“我喜歡它是多麼容易與Arduino的IDE和格羅夫生態系統的使用。” -李麗莎,產品經理
該WIO GPS局(無線輸入輸出)是一種基於MT2503和Arduino的M0 MCU其實現更快的物聯網的GPS解決方案的開源網關。這Arduino的和格羅夫兼容的開發板可以幫助您跟踪地球上幾乎任何移動的東西,然後上傳數據無線。通過集成藍牙3.0和GPRS(的LTE解決方案計劃於第三季度發布)時,WIO GPS局允許靈活的通信解決方案。雖然有可用於Arduino的GPS / GPRS盾牌和其他開發板,Seeed認為,有單板解決方案是你的項目的最佳方法。該WIO GPS董事會可於4月21 日在這裡序,將花費$ 39.90。
Arduino的和格羅夫兼容性允許通過眾多的圖書館更快的發展和支持的社區。這將提供與板的GPS庫並不僅僅局限於Arduino的-如果你選擇在C / C ++開發它可以起到一樣好。隨著6格羅夫連接可用的開發人員可以從180多個傳感器和執行器的任意組合插頭進行任何項目,並解決任何問題。簡化原型設計和開發階段是我們的目標。
該WIO GPS主板非常適合戶外項目,其中設備可以連接到GPS衛星,提供它貼在物品上的實時位置。的GPRS提供了一個溫和的帶寬,其允許用戶與設備之間的直接相互作用。例如有些項目可能是一個自行車共享服務,跟踪寵物或家畜,定位車輛,甚至跟踪的孩子。
我們前面提到的WIO GPS局是通往更快的物聯網解決方案-我們的意思吧!請問您需要的項目一些額外的傳感器,比如溫度傳感器,也許加速計來告訴對象的方向?我們的樹叢傳感器很容易地插入到我們的董事會和讓你快速原型,並提供項目與概念驗證。接下來,我們可以幫你從原型到工程樣品,與您合作,定制自己的WIO GPS董事會的版本。最後,如果你決定把你的項目推向市場,我們可以幫助您與製造,甚至通過我們的網站以及渠道銷售您的產品!
從在家裡做一個基於GPS的樂趣項目,製造和銷售GPS產品的消費者,Seeed是來幫助你成功。
主要特徵
與GPS +北斗+ QZSS連接-允許更高的精確定位全球各地
99個信道允許更快鎖定時間
GLP模式- 40%功耗為正常模式
LOCUS技術-記錄導航數據自動
GPS,GSM和BT包括天線
GSM AT命令:GSM 07.07,07.05和增強的AT命令
藍牙3.0與SPP簡介和HFP-AG簡介
6格羅夫連接器(2倍數碼,2×模擬,1個UART,1 I2C)
Arduino的IDE兼容
小型封裝(54.7毫米X48.2毫米)
納米SIM和microSD 2合1插槽
硬件概述
產品規格
項目 |
功能 |
值 |
微控制器 |
處理器 |
ATSAMD21G18A-MU 的ARM Cortex-M0 + 48MHZ |
記憶 |
256K字節的閃存 | |
32K字節SRAM | ||
GSM / GPRS |
GSM |
850/900/1800 / 1900MHz的: 類4(2W @ 850 / 900MHz的) 類1(1W @ 1800 / 1900MHz的) |
AT命令: GSM 07.07,07.05和增強的AT命令 |
||
低功耗: 1.2mA@DRX=5V |
||
GPRS |
GPRS多時隙類12: 下到85.6kbps 高達85.6kbps |
|
協議: TCP / UDP / FTP / HTTP / PPP / SSL |
||
短信 |
點對點短消息 短信播報 文本和PDU模式 |
|
音頻 |
迴聲消除 消聲 |
|
藍牙 |
藍牙3.0: SPP HFP-AG |
|
GNSS |
系統 |
GPS L1為1575.42MHz 北斗B1 1561.10MHz |
精確 |
<2.5米CEP(2.5M半徑) | |
到首次鎖定 | ||
技術 |
EASY / LOCUS / AlwaysLocate / EPO / GLP / AIC | |
外圍設備 |
樹林 |
2×格羅夫數字端口 |
2×模擬端口 | ||
1×UART | ||
1×I2C | ||
天線 |
GSM天線 | |
藍牙天線 | ||
GNSS天線 | ||
其他 |
USB:電源/固件上傳 | |
JST 1.0電池連接器 | ||
3.5毫米音頻插孔(麥克風和聲音) | ||
2按鈕: GSM電源按鈕(MC20) 復位按鈕(M0) |
||
用戶RGB LED | ||
音箱接口 | ||
納米SIM和microSD 2合1插槽 | ||
尺寸 |
長度 |
54.7毫米 |
寬度 |
48.2毫米 | |
重量 |
董事會(無電池):45克 天線:9克 |
文件
從團隊的其他行情
“我很高興能夠提供一個開發板與GPS,GPRS和藍牙在這樣的小尺寸3.0的解決方案。” -葉曉波,產品經理。