資料來源:https://www.seeedstudio.com/Phoenard-Phoenex-Shield-p-2680.html
This Phoenard board extension can be docked using the bottom 30-pin connector, exposing most (not all!) Arduino pins. You can then connect Arduino board extensions to the device easily.
If you want one Phoenard, please visit here.
Features
Specification
Part List
Note
This board uses a 3v3 main board voltage and may not be compatible with all 5v sensors and devices. The 5v power on the extension connector is only present when USB power is provided.
A starters guide together with documentation and software examples is available on our website:
Dimensions | 85mm x 60mm x 12mm |
Weight | G.W 16g |
Battery | Exclude |
這Phoenard板擴展名可以用底部的30針連接器對接,露出大部分(不是全部!)Arduino的引腳。然後,您可以Arduino板的擴展連接到該設備很容易。
如果你想要一個Phoenard,請訪問這裡 。
特徵
規範
零件清單
注意
這款主板採用的是3V3主板電壓,可能無法與所有5V的傳感器和設備兼容。提供USB電源時,擴展連接器上的5V電源才存在。
一個初學者指南文檔和軟件示例一起是在我們的網站: